Punching and pulling
Material Steel and coated steel, stainless steel and non-ferrous alloys
Maximum sheet size 1250mm – 2500mm
Sheet thickness 1mm – 3mm
Accuracy 0.1mm
Powder coating
The company has a powder coating line that provides complete processing of metal products in large quantities and at the highest level, the quality corresponds to the corrosion resistance category C4 (high) in accordance with the ISO 12944 standard.
The coating of metal parts painted in this way is much more resistant to environmental influences (corrosion) and mechanical damage. The color is adapted to climates with industrial pollution, as well as seaside climates with a high salt content.
The technological process provides for the coating of parts with powder paint based on polyester or epoxy polyester resins for both outdoor and indoor use. Before applying powder paint, the metal is treated with an alkaline solution, phosphatization and zinc passivation.
The parts dry, then polyester (outer type) or polyester + epoxy (inner type) are applied, which are shock-resistant and also resistant to adverse environmental conditions (also UV radiation).
CNC Plasma Cutting
Panel bending
Specifications:
Length of the incoming sheet, min./makc.
285mm / 2495mm
Width of the incoming sheet, min./makc.
140mm / 1600mm
Makc. diagonal allowed for rotation
2500mm
Makc. bending length
2180mm
CNC bending
AMADA HFE-3i 1003L
Technology – 3-point
Press capacity – 1000 kN
Length 3000 mm
CNC controls AMNC 3i
CNC Laser Cutting
Bystronic – ByAutonom 3015
Sheet size 1500x3000mm
Materials:
Stainless steel 25 mm
Steel 25 mm
Aluminum 15 mm
Pipe cutting 315mm
Sealing
The sealing device is designed to apply a two-component elastic sealing material to various surfaces. A polyurethane-based material is used for the seal. This sealing technology is mainly used for sealing electrical cabinets and various enclosures.
A sealing system of this type is much more resistant to both physical and chemical attack, for example, with large fluctuations in temperature, the properties of the seal and insulation do not change. The temperature can range from -40 C ° to +120 C ° and for a short time up to +160 C °.
Benefits:
- The seal is elastic, there is no permanent deformation;
- Low water absorption;
- High resistance to metal and painted surfaces;
- The compaction process is very fast, since the application speed is 20-30 m / min with good foam quality;
- The seal can be applied to different heights and widths;
- The seal can be applied very clearly to various forms with both flat and uneven surfaces.
The dimensions of the material to be sealed cannot exceed 2500x1150x350mm.
